{"id":30,"count":2,"description":"<!-- wp:heading -->\r\n<h2 id=\"h-valves-in-oxygen-service\">Ventile im Sauerstoffbetrieb<\/h2>\r\n<!-- \/wp:heading -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nSauerstoff hat typischerweise aktive chemische Eigenschaften. Er ist eine stark oxidierende und brennbare Substanz und kann sich mit den meisten Elementen zu Oxiden verbinden, au\u00dfer mit Gold, Silber und Edelgasen wie Helium, Neon, Argon und Krypton. Eine Explosion tritt auf, wenn Sauerstoff in einem bestimmten Verh\u00e4ltnis mit brennbaren Gasen (Acetylen, Wasserstoff, Methan usw.) vermischt wird oder wenn ein Rohrventil pl\u00f6tzlich auf Feuer st\u00f6\u00dft. Der Sauerstofffluss im Rohrleitungssystem \u00e4ndert sich beim Sauerstoffgastransport. Die European Industrial Gas Association (EIGA) hat den Standard IGC Doc 13\/12E \u201eSauerstoffpipelines und Rohrleitungssysteme\u201c entwickelt, der die Sauerstoff-Arbeitsbedingungen in \u201eAufprall\u201c und \u201eNicht-Aufprall\u201c unterteilt. Der \u201eAufprall\u201c ist ein gef\u00e4hrlicher Anlass, da dabei leicht Energie freigesetzt wird, die zu Verbrennung und Explosion f\u00fchrt. Das Sauerstoffventil ist ein typischer \u201eAufprallort\u201c.\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nEin Sauerstoffventil ist eine Art Spezialventil, das f\u00fcr Sauerstoffleitungen entwickelt wurde und in der Metallurgie, Erd\u00f6lindustrie, Chemie und anderen Industriezweigen, in denen Sauerstoff verwendet wird, weit verbreitet ist. Das Material des Sauerstoffventils ist auf den Betriebsdruck und die Durchflussrate beschr\u00e4nkt, um das Aufeinandertreffen von Partikeln und Verunreinigungen in der Leitung zu verhindern. Daher sollte der Ingenieur bei der Auswahl eines Sauerstoffventils Reibung, statische Elektrizit\u00e4t, Z\u00fcndung von Nichtmetallen, m\u00f6gliche Schadstoffe (Oberfl\u00e4chenkorrosion von Kohlenstoffstahl) und andere Faktoren umfassend ber\u00fccksichtigen.\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:heading -->\r\n<h2>Sauerstoffeigenschaften<\/h2>\r\n<!-- \/wp:heading -->\r\n\r\n<!-- wp:list -->\r\n<ul>\r\n \t<li>Die normale Konzentration in der Luft betr\u00e4gt 21%<\/li>\r\n \t<li>Farblos, geruchlos und geschmacklos.<\/li>\r\n \t<li>Kann von den menschlichen Sinnen nicht wahrgenommen werden<\/li>\r\n \t<li>Nicht brennbar, unterst\u00fctzt und beschleunigt jedoch die Verbrennung.<\/li>\r\n \t<li>Brennbare Materialien, darunter auch einige Materialien, die normalerweise relativ<\/li>\r\n \t<li>In der Luft nicht entflammbar, verbrennt jedoch sehr schnell in hohen Sauerstoffkonzentrationen.<\/li>\r\n \t<li>Drei Elemente, die f\u00fcr einen Sauerstoffbrand notwendig sind, sind eine Z\u00fcndquelle, Sauerstoff und brennbares Material (Brennstoff) \u2013 bekannt als das \u201eBranddreieck\u201c<\/li>\r\n<\/ul>\r\n<!-- \/wp:list -->\r\n\r\n<!-- wp:heading -->\r\n<h2>Im Sauerstoffventil verwendetes Material<\/h2>\r\n<!-- \/wp:heading -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nOrganic materials have ignition temperatures below those of metals. The use of organic materials in contact with oxygen should be avoided, particularly when the material is directly in the flow stream. When an organic material must be used for parts such as valve seats, diaphragms, or packing, it is preferable to select a material with the highest ignition temperature, the lowest specific heat, and the necessary mechanical properties.\r\nLubricants and sealing compounds should be used only if they are suitable for oxygen service and then used sparingly. Ordinary petroleum lubricants are not satisfactory and are particularly hazardous because of their high heat of combustion and high rate of reaction.\r\nThe approximate ignition temperatures in 138 bar (2000 psig) oxygen for a few organic materials are shown in table 1.\r\nTable 1. Typical Ignition Temperatures\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:table {\"className\":\"is-style-stripes\"} -->\r\n<figure class=\"wp-block-table is-style-stripes\">\r\n<table>\r\n<tbody>\r\n<tr>\r\n<td>MATERIAL<\/td>\r\n<td class=\"has-text-align-center\" data-align=\"center\">TYPISCHE Z\u00dcNDTEMPERATUR BEI 138 BAR (2000 PSIG) SAUERSTOFF<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>PTFE und PCTFE<\/td>\r\n<td class=\"has-text-align-center\" data-align=\"center\">468<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>70% Bronzegef\u00fclltes PTFE<\/td>\r\n<td class=\"has-text-align-center\" data-align=\"center\">468<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Fluorelastomer<\/td>\r\n<td class=\"has-text-align-center\" data-align=\"center\">316<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Nylon<\/td>\r\n<td class=\"has-text-align-center\" data-align=\"center\">210<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Polyethylen<\/td>\r\n<td class=\"has-text-align-center\" data-align=\"center\">182<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Chloropren und Nitril<\/td>\r\n<td class=\"has-text-align-center\" data-align=\"center\">149<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/figure>\r\n<!-- \/wp:table -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\n<strong>Metalle<\/strong>\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nDie Auswahl der Metalle sollte auf ihrer Entz\u00fcndungsbest\u00e4ndigkeit und Reaktionsgeschwindigkeit basieren. Nachfolgend finden Sie einen Vergleich dieser beiden Eigenschaften f\u00fcr einige h\u00e4ufig verwendete Ventilmaterialien.\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\n<strong>Entz\u00fcndungsbest\u00e4ndigkeit in Sauerstoff<\/strong>\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nDie Materialien sind in der Reihenfolge vom schwersten bis zum leichtesten Entz\u00fcndbaren aufgelistet.\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:list {\"ordered\":true} -->\r\n<ol>\r\n \t<li>Kupfer, Kupferlegierungen und Nickel-Kupfer-Legierungen \u2013 am best\u00e4ndigsten<\/li>\r\n \t<li>Edelstahl (Serie 300)<\/li>\r\n \t<li>Kohlenstoffstahl<\/li>\r\n \t<li>Aluminium \u2013 am wenigsten best\u00e4ndig<\/li>\r\n<\/ol>\r\n<!-- \/wp:list -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\n<strong>Reaktionsrate<\/strong>\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nDie Materialien werden in der Reihenfolge von der langsamsten bis zur schnellsten Verbrennungsrate aufgelistet.\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:list {\"ordered\":true} -->\r\n<ol>\r\n \t<li>Kupfer, Kupferlegierungen und Nickel-Kupfer-Legierungen leiten normalerweise keine Verbrennungsprodukte weiter.<\/li>\r\n \t<li>Kohlenstoffstahl<\/li>\r\n \t<li>Edelstahl (Serie 300)<\/li>\r\n \t<li>Aluminium \u2010\u2010 brennt sehr schnell<\/li>\r\n<\/ol>\r\n<!-- \/wp:list -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nBeachten Sie, dass Edelstahl nach dem Entz\u00fcnden schneller brennt als Kohlenstoffstahl. Dennoch gelten die austenitischen Edelstahlsorten (Serie 300) aufgrund ihrer hohen Entz\u00fcndungsbest\u00e4ndigkeit als viel besser als Kohlenstoffstahl.\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:generateblocks\/button-container {\"uniqueId\":\"6d8495a3\",\"isDynamic\":true,\"blockVersion\":2} -->\r\n<!-- wp:generateblocks\/button {\"uniqueId\":\"3d442e11\",\"hasUrl\":true,\"target\":true,\"backgroundColor\":\"#0366d6\",\"textColor\":\"#ffffff\",\"backgroundColorHover\":\"#222222\",\"textColorHover\":\"#ffffff\",\"paddingTop\":\"15\",\"paddingRight\":\"20\",\"paddingBottom\":\"15\",\"paddingLeft\":\"20\"} -->\r\n<a class=\"gb-button gb-button-3d442e11 gb-button-text\" href=\"https:\/\/zecovalve.com\/de\/contact\/\" target=\"_blank\" rel=\"noopener noreferrer\"><strong>PREIS F\u00dcR SAUERSTOFFVENTIL ERHALTEN<\/strong><\/a>\r\n<!-- \/wp:generateblocks\/button -->\r\n<!-- \/wp:generateblocks\/button-container -->\r\n\r\n<!-- wp:heading -->\r\n<h2>Wie gef\u00e4hrlich ist Sauerstoff<\/h2>\r\n<!-- \/wp:heading -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nSauerstoff allein ist nicht brennbar. Kommt es jedoch zu einer Verbrennung, f\u00fchrt ein hoher Sauerstoffgehalt dazu, dass brennbare Materialien viel schneller verbrennen. Partikeleinschlag, schnelle Druckbeaufschlagung oder Kompression von Materialien k\u00f6nnen zu einer Erhitzung f\u00fchren, die eine Verbrennung ausl\u00f6sen kann. Auch Verunreinigungen und mechanische Energie wie Reibung k\u00f6nnen eine Entz\u00fcndung ausl\u00f6sen und bei mehr Sauerstoff zu schnellen, hei\u00dfen Br\u00e4nden f\u00fchren. Je h\u00f6her die Sauerstoffkonzentration, desto gr\u00f6\u00dfer das Verbrennungsrisiko.\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nLarson wies darauf hin, dass bei fl\u00fcssigem Sauerstoff zwar gewisse Vorsichtsma\u00dfnahmen getroffen werden m\u00fcssen, beim Umgang mit gasf\u00f6rmigem Sauerstoff jedoch besondere Wachsamkeit geboten sei.\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:heading -->\r\n<h2>Risikominimierung<\/h2>\r\n<!-- \/wp:heading -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nUm das Brandrisiko zu minimieren, ist es wichtig, f\u00fcr die Ventile hochvertr\u00e4gliche Materialien zu w\u00e4hlen \u2013 sowohl Metalle als auch weiche Materialien. Es ist auch wichtig, Z\u00fcndmechanismen zu minimieren. Dies kann durch die Minimierung weicher Materialien und die Einschr\u00e4nkung des Schmiermitteleinsatzes erreicht werden. Es ist auch wichtig, bew\u00e4hrte Verfahren anzuwenden \u2013 vom Entwurf \u00fcber die Herstellung und den Transport des Produkts zum Einsatzort bis hin zu seinem Betrieb.\r\n\r\n<!-- \/wp:paragraph -->\r\n\r\n<!-- wp:heading -->\r\n<h2>Wie w\u00e4hlt man ein f\u00fcr Sauerstoff verwendetes Ventil aus?<\/h2>\r\n<!-- \/wp:heading -->\r\n\r\n<!-- wp:paragraph -->\r\n\r\nEinige Projekte verbieten ausdr\u00fccklich die Verwendung von Schiebern in Sauerstoffleitungen mit einem Auslegungsdruck von mehr als 0,1 MPa. Dies liegt daran, dass die Dichtfl\u00e4che von Schiebern durch Reibung bei der Relativbewegung (d. h. beim \u00d6ffnen\/Schlie\u00dfen des Ventils) besch\u00e4digt wird, was dazu f\u00fchrt, dass kleine \u201eEisenpulverpartikel\u201c von der Dichtfl\u00e4che abfallen und leicht Feuer fangen. In \u00e4hnlicher Weise explodiert auch die Sauerstoffleitung eines anderen Ventiltyps in dem Moment, in dem der Druckunterschied zwischen den beiden Seiten des Ventils gro\u00df ist und das Ventil schnell \u00f6ffnet.\r\n\r\n<!-- \/wp:paragraph -->","link":"https:\/\/zecovalve.com\/de\/tag\/oxygen","name":"Sauerstoff","slug":"oxygen","taxonomy":"post_tag","meta":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v15.4 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Oxygen Ball Valve - Choose Right Oxygen Valve | ZECO Valve<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/zecovalve.com\/de\/tag\/oxygen\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Oxygen Ball Valve - Choose Right Oxygen Valve | ZECO Valve\" \/>\n<meta property=\"og:description\" content=\"Valves in Oxygen Service  Oxygen has typically active chemical properties. It is a strong oxidizing and combustible substance and can combine with most elements to form oxides except for gold, silver, and inert gases such as helium, neon, argon, and krypton. An explosion occurs when oxygen is mixed with combustible gases (acetylene, hydrogen, methane, etc.) in a certain proportion or when the pipe valve meets a sudden fire. The oxygen flow in the pipeline system change in the process of oxygen gas transportation, the European Industrial Gas Association (EIGA) developed the standard IGC Doc 13\/12E \u201cOxygen Pipeline and Piping Systems\u201d divided the Oxygen working conditions for \u201cimpact\u201d and \u201cnon-impact\u201d. The \u201cimpact \u201d is a dangerous occasion because it is easy to stimulate energy, causing combustion and explosion. The oxygen valve is the typical \u201cimpact occasion\u201d.  Oxygen valve is a type of special valve designed for an oxygen pipeline and has been widely used in metallurgy, petroleum, chemical, and other industries involving oxygen. The material of the oxygen valve is limited to working pressure and flow rate to prevent the collision of particles and impurities in the pipeline. Therefore, the engineer should fully consider friction, static electricity, non-metal ignition, possible pollutants (carbon steel surface corrosion), and other factors when selecting an oxygen valve.  Oxygen Properties  The normal concentration in air is 21% Colorless, odorless, and tasteless. Cannot be detected by the human senses Not flammable but supports and accelerates combustion. Flammable materials, including some materials that are normally relatively Non-flammable in air, burn very rapidly in high oxygen concentrations. Three elements necessary for an oxygen fire are an ignition source, oxygen, and flammable material (fuel) \u2013 known as the \u201cfire triangle\u201d  Material Used in Oxygen Valve  Organic materials have ignition temperatures below those of metals. The use of organic materials in contact with oxygen should be avoided, particularly when the material is directly in the flow stream. When an organic material must be used for parts such as valve seats, diaphragms, or packing, it is preferable to select a material with the highest ignition temperature, the lowest specific heat, and the necessary mechanical properties. Lubricants and sealing compounds should be used only if they are suitable for oxygen service and then used sparingly. Ordinary petroleum lubricants are not satisfactory and are particularly hazardous because of their high heat of combustion and high rate of reaction. The approximate ignition temperatures in 138 bar (2000 psig) oxygen for a few organic materials are shown in table 1. Table 1. Typical Ignition Temperatures    MATERIAL TYPICAL IGNITION TEMPERATURE IN 138 BAR (2000 PSIG) OXYGEN  PTFE and PCTFE 468  70% Bronze\u2010filled PTFE 468  Fluoroelastomer 316  Nylon 210  Polyethylene 182  Chloroprene and Nitrile 149    Metals  The selection of metals should be based on their resistance to ignition and rate of reaction. Following is a comparison of these two properties for some commonly used valve materials.  Resistance to Ignition in Oxygen  Materials are listed in order from hardest to ignite to easiest to ignite.  Copper, copper alloys, and nickel\u2010copper alloys \u2010\u2010 most resistant Stainless steel (300 series) Carbon steel Aluminum \u2010\u2010 least resistant  Rate of Reaction  Materials are listed in order from the slowest rate of combustion to the most rapid rate of combustion.  Copper, copper alloys, and nickel\u2010copper alloys \u2010\u2010 do not normally propagate combustion Carbon steel Stainless steel (300 series) Aluminum \u2010\u2010 burns very rapidly  Note that stainless steel, once ignited, burns more rapidly than carbon steel. Nevertheless, the austenitic grades (300 series) of stainless steel are considered to be much better than carbon steel because of their high resistance to ignition.  GET OXYGEN VALVE PRICE  How Dangerous is Oxygen  Oxygen is not combustible alone. However, if there is a combustion event, high-oxygen content means that combustible materials do burn much faster. Particle impact, rapid pressurization, or compression of materials can result in heating that could cause combustion. Contamination and mechanical energy such as friction can also cause ignition and result in fast, hot fires when more oxygen is present. The higher the concentration of oxygen, the greater the risk of combustion.  Larson pointed out that, while certain precautions must be taken with liquid oxygen, it is even more important to be vigilant when working with it in the gaseous state.  Minimizing Risk  To minimize the risk of fire, it is important to choose highly compatible materials for valves\u2014both metals and soft goods. It is also important to minimize ignition mechanisms. That can be done by minimizing soft goods and limiting the use of lubricants. It is also essential to utilizing best practices\u2014from design to manufacture, to getting the product to the site, to operating it.  How to choose a valve used for oxygen?  Some projects explicitly prohibit gate valves from being used in oxygen pipelines with design pressure greater than 0.1mpa. This is because the sealing surface of gate valves will be damaged by friction in relative motion (i.e. the opening\/closing of the valve), which causes small \u201ciron powder particles\u201d to fall off from the sealing surface and easily catch fire. Similarly, the oxygen line of another type of valve will also explode at the moment when the pressure difference between the two sides of the valve is large and the valve opens quickly.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/zecovalve.com\/de\/tag\/oxygen\" \/>\n<meta property=\"og:site_name\" content=\"ZECO Valve\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebSite\",\"@id\":\"https:\/\/zecovalve.com\/#website\",\"url\":\"https:\/\/zecovalve.com\/\",\"name\":\"ZECO Valve\",\"description\":\"Industrial Ball Valve, Gate Valve and Globe Valve Manufacturer\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":\"https:\/\/zecovalve.com\/?s={search_term_string}\",\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"de\"},{\"@type\":\"CollectionPage\",\"@id\":\"https:\/\/zecovalve.com\/tag\/oxygen#webpage\",\"url\":\"https:\/\/zecovalve.com\/tag\/oxygen\",\"name\":\"Oxygen Ball Valve - Choose Right Oxygen Valve | ZECO Valve\",\"isPartOf\":{\"@id\":\"https:\/\/zecovalve.com\/#website\"},\"breadcrumb\":{\"@id\":\"https:\/\/zecovalve.com\/tag\/oxygen#breadcrumb\"},\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/zecovalve.com\/tag\/oxygen\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/zecovalve.com\/tag\/oxygen#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"item\":{\"@type\":\"WebPage\",\"@id\":\"https:\/\/zecovalve.com\/\",\"url\":\"https:\/\/zecovalve.com\/\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"position\":2,\"item\":{\"@type\":\"WebPage\",\"@id\":\"https:\/\/zecovalve.com\/tag\/oxygen\",\"url\":\"https:\/\/zecovalve.com\/tag\/oxygen\",\"name\":\"oxygen\"}}]}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","_links":{"self":[{"href":"https:\/\/zecovalve.com\/de\/wp-json\/wp\/v2\/tags\/30","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/zecovalve.com\/de\/wp-json\/wp\/v2\/tags"}],"about":[{"href":"https:\/\/zecovalve.com\/de\/wp-json\/wp\/v2\/taxonomies\/post_tag"}],"wp:post_type":[{"href":"https:\/\/zecovalve.com\/de\/wp-json\/wp\/v2\/posts?tags=30"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}