What is Valve Sealant?

• Forms a flexible renewable seal around the valve port.
• An integral part of every lubricated plug valve.
• Resists chemical attack and dissolving characteristics of line medium.
• Combines base oils, thickeners, and additives.

Why Use Valve Sealants?

• Drop-Tight Seal
  • To secure an absolutely tight seal, the film of the sealant works to form a seal between the sealing surfaces of the valve. The seal is formed by sealant transmitted through a system of passageways around the valve port. With the proper selection of sealant for your particular service, the seal can be retained over a wide range of temperatures and pressures.
• Lubrication
  • Prevents metal-to-metal contact of the valve sealing services by filming over-bearing irregularities. No matter how finely ground a metal surface may be, the metal is a series of peaks and valleys. As one metal slides against another, friction is set up and adhesion, shearing, or plowing may result. A protective film of sealant over the bearing area prevents metal-to-metal rubbing.
• Renewable Seat
  • There is no need to disassemble a lubricated valve or remove it from service to replace mildly damaged seats. Sealant, as a structural part of lubricated valves, provides a flexible and renewable seat, eliminating the necessity of force fit contact to effect a seal. For this purpose, the sealant not only must have proper plasticity but also resistance to line fluids such as solvents and chemicals. The sealant forms a seal between the sealing surfaces of the valve even under pressure.
• Plug Jacking
  • The fundamental operating principle of the traditional lubricated plug valve design lies in the application of Pascal‘s Law. The law states that a unit pressure applied to the liquid contained in a sealed vessel is transmitted to every part of the liquid with undiminished force, thus multiplying the force many times, depending on the area of the interior of the vessel. The sealant, under pressure developed by sealant injection, supplies the hydraulic means for lifting the plug from its tapered seat when and if that force is needed to free the plug.
• Corrosion Resistance
  • Helps prevent corrosion of valve internals.

Sealant Injection Fitting

The sealant injection fitting is one of our valve fittings used in feeding lubricants or grease into valve parts for repair or maintenance. These are primarily designed to provide a periodic injection of lubricant or sealants into pipeline valves. The materials we produce include stainless steel 316, carbon steel 4140 zinc plated, and Alloys. In the Oil& Gas segment, most ball valves have two sealant injection fittings, generally, one is located at the stem area and the other at the seating area. This is one of our major applications that fit the API pressure class of 10,000psi.

Ball Valve Sealants

Sealant injection fittings of ball valve are installed at the stem and seat area. They can act as temporary sealing.
 
When the soft sealing is damaged and a leakage happens because of fire accidents, the grease or sealant can be injected through sealant or lubricant injection fitting. The injected sealant works as a temporary sealing to prevent further leakage.
 
But it should bear in mind that the sealant injection system is only for emergency use. The action of injecting grease through sealant injection fittings increases risks of further damage to the ball valve seat by attracting more grease and debris.

Related Tags :

Ten articles before and after

What is a diaphragm valve? – Zeco |API Approved Valve Supplier

Fire Safe Test API 6FA and API 607 – Zeco |API Approved Valve Supplier

What is a plunger valve? – Zeco |API Approved Valve Supplier

T Port & L Port Three-Way Ball Valves – Zeco |API Approved Valve Supplier

What is the Relief Valve (Pressure Relief Valve)? – Zeco |API Approved Valve Supplier

What is a Plug Valve? – Zeco |API Approved Valve Supplier

Fire Safe Design for Ball Valves – Zeco |API Approved Valve Supplier

Classification of ball valves – Zeco |API Approved Valve Supplier

The Anti-Static Device of Ball Valves – Zeco |API Approved Valve Supplier

A Brief Introduction of Ball Valve – Zeco |API Approved Valve Supplier

The post Sealant Injection System of Ball Valves appeared first on ZECO Valve.