2 Steps To Understand Solenoid Valve Working Principle

Jerry — Thu, 30 Dec 2021 07:21:21 +0000

The solenoid valve has an airtight cavity with through holes in different positions. Each hole is connected to a different oil pipe. In the middle of the cavity is a piston. On both sides are two electromagnets. The coil of the magnet on which the valve body is connected will be drawn to which side By controlling the movement of the valve body to open or close different drain holes, and the oil hole is always open, the hydraulic oil will enter different drain pipes, and then through the oil pressure to push the piston cylinder, the Piston, in turn, moves the Piston Rod driven mechanism. In this way, by controlling the current of the electromagnet, the movement of the machine can be controlled.

Solenoid Valve Working Principle

A solenoid valve is an electrically controlled valve. The valve features a solenoid, which is an electric coil with a movable ferromagnetic core (plunger) in its center. In the rest position, the plunger closes off a small orifice. An electric current through the coil creates a magnetic field. The magnetic field exerts an upwards force on the plunger opening the orifice. This is the basic principle that is used to open and close solenoid valves.

Solenoid Valve from the Principle is Divided into Two Categories:

Direct-acting solenoid valve

Principle: When energized, the electromagnetic coil generates electromagnetic force to lift the closing member from the valve seat, and the valve opens; when the power is off, the electromagnetic force disappears, and the spring presses the closing member against the valve seat, and the valve closes.

Features: It can work normally under vacuum, negative pressure, and zero pressure, but the diameter is generally not more than 25mm. The pilot-type solenoid valve adopts the method of opening the large valve by the small valve, the flow rate is large, and the large diameter is selected as the pilot type.

Pilot-operated solenoid valve

Principle: When energized, the electromagnetic force opens the pilot hole, the pressure in the upper chamber drops rapidly, and a pressure difference between the lower part and the lower part is formed around the closing member. The fluid pressure pushes the closing member upward to move the valve to open; when the power is off, The spring force closes the pilot hole, and the inlet pressure passes through the bypass hole to form a lower low and high-pressure difference around the valve member, and the fluid pressure pushes the closing member downward to close the valve.

Features: The direct-acting solenoid valve has a corresponding speed, and the action time is short. When the frequency is high, the direct-acting type is generally used.

ZECO Valve

What are Automatic Control Valves?

Ball Valve Manufacturer – Various Ball Valve Types

Gate Valve Manufacturer – Various Gate Valve Types

Globe Valve Manufacturer – Various Globe Valve Types

Butterfly Valve Manufacturer – Various Butterfly Valve Types

Balancing Valve – HVAC Valve

Check Valve Manufacturer – Various Check Valve Types

Ten articles before and after

News – 3 Tips For How To Maintain The Electric Actuator Valve | API approved valve manufacturer

News – Working Principle Of Air Actuated Butterfly Valves | API approved valve manufacturer

News – Working Principle Of High Temperature Solenoid Valves | API approved valve manufacturer