dbb valves – ZECO Valve

ZECO DBB Valve – INTEC Duoball valve | Double Block and Bleed Valve

Jerry — Thu, 20 Jan 2022 08:26:39 +0000

What is DBB Valve?

There are two entities in the United States that define DBB—API and OSHA. According to API, a DBB valve is a “single valve with two seating surfaces that, in the closed position, provides a seal against pressure from both ends of the valve, with a means of venting/bleeding the cavity between the seating surfaces.” API also notes in this definition that this valve does not provide positive double isolation when only one side is under pressure.

In contrast, OSHA describes DBB as “the closure of a line, duct, or pipe by closing and locking or tagging two inline valves and by opening and locking or tagging a drain or vent valve in the line between the two closed valves.”

API’s DBB definition does not achieve the same level of isolation as OSHA’s. API allows DBB valves to be one single valve with two unidirectional seats, while the OSHA standard can only be achieved with two separate valves with a method to bleed pressure in between. There are some valves that utilize a twin-valve design. By combining two valves into one body, a twin-valve design reduces weight and potential leaks paths while meeting the OSHA requirements for double block and bleed.

Valve associations usually choose to follow either API’s or OSHA’s definition, but some have created their own handbook with their own definitions for industry terms. For example, the British Valve and Actuator Association (BVAA) defines DBB as “a manifold that combines one or more isolation valves, usually ball valves, and one or more bleed/vent, usually a needle-style global valve, into one assembly for interface with other components (e.g., pressure measurement transmitters, pressure gauges, and switches).”

How does DBB Valve work?

Two block valves provide isolation from the upstream and downstream flows. A set of gate, ball, needle, or globe valves is normally used as the block valves that are placed back to back. In the center cavity of the two-block valves, a third valve known as the bleed valve is positioned.

The same double block and bleed arrangement can be obtained using three separate valves. But the single unit double block and bleed valve saves huge space, weight, installation time, and cost. Also, from the operation and maintenance viewpoint single unit double block and bleed valves are better as potential leak paths are significantly reduced in single unit. Pressure drop is also minimised.

Features of DBB Valve

By strategically incorporating DBBs into a process system you are increasing system integrity and reducing maintenance times. The key benefits of a DBB valve are:

Increases safety and quick turnaround of maintenance and repair procedures.
DBB valves are tightly sealed to prevent any leakages.
DBB valves are resistant to vibrations, changes in pressure and incorporate anti-static and anti-blowout features.
There is no need to use brackets to support DBB valves as they are designed as a single unit and can be bolted or screwed to the process pipes.

Differences of DIB and DBB

With a DBB valve, there are usually two unidirectional self-relieving seats. These seats do not rely on an outside mechanism to relieve pressure. In contrast, a DIB valve utilizes one or two bidirectional seats. The valve provides double isolation from pressure at both ends of the valve but cannot relieve body cavity pressure past the seats. DIB valves require an external relief system to relieve pressure buildup.

Both valves can provide isolation in both the upstream and downstream directions, even in high-pressure or high-temperature situations. Isolation is important in cases where leakage through a valve could have major consequences. Once the fluid is isolated, the bleed mechanism can drain the area between the two valves or two seating surfaces. This is important for maintenance and integrity check situations where leakage can be monitored.

What is INTEC Duo Ball Valve?

Especially in increasingly safety-critical applications, valves with a “double block and bleed” function are in demand. This requirement can be met by ball valves with a ball bearing and spring loaded ball seats on both sides (Double Block) and a venting or draining connection (Bleed) in the so-called dead space.

The duoball ball valve has a double block and independent shut-off.

Compared to standard ball valves, the safety can be increased by a factor of 4.
The design is based on the integration of two ball valves in one body.
Like all ball valves of the INTEC series, the Duoball valve is available with floating ball or trunnion mounted ball as well as soft or metal seated execution
All ball seat systems naturally fulfil the leakage rate A according to EN 12266 and are absolutely gas-tight.
Due to the double insulation and venting function, every duoball valve is bi-directionally tight.
In addition, the Duoball valve is also available in the standardised overall length according to EN 588 R1 and, in addition to increasing safety, offers a compact and cost-effective alternative to using several standard fittings.

INTEC Duoball valves and CO2 gas (carbon dioxide gas).

For industrial companies, there is a requirement to meet the climate targets, to isolate, transport, safely store or further process of the CO₂ gas (carbon dioxide gas) that has been produced.

The CO₂capture and storage are called Carbon Capture and Storage (CCS) and the utilization is called Carbon Capture and Utilization (CCU). For this purpose, the Duoball ball valves type nominal size DN32 with a ball valve as a bleed used to relieve the pressure of the defined smallest possible gap of the double and independent shut-off in the port.

This generates a significant contribution to TCO as a result of optimized OPEX and CAPEX.

ZECO Valve

Ball Valve Manufacturer – Various Ball Valve Types

Difference Between Floating Ball Valve & Trunnion Ball Valve

Globe Valve vs Ball Valve

Gate Valve vs Ball Valve

Thermoplastic Materials as Ball Valve Seat & Butterfly Valve Seat

Globe Valve vs Ball Valve

12 inch Gate Valve Supplier

Ten articles before and after

Spring closing unit | API approved valve manufacturer

Repair | API approved valve manufacturer

Space-saving installation | API approved valve manufacturer

Realized and lived sustainability | API approved valve manufacturer

tert-Butylamine (tBA) | API approved valve manufacturer

Diol plant | API approved valve manufacturer

Polymer melt | API approved valve manufacturer

High-pressure Ball Valves | API approved valve manufacturer

Covid-19 Update | API approved valve manufacturer

INTEC Duoball valve | API approved valve manufacturer

The post ZECO DBB Valve – INTEC Duoball valve | Double Block and Bleed Valve appeared first on ZECO Valve.

Double Block and Bleed Valve Manufacturer

Jerry — Tue, 18 Jan 2022 09:37:45 +0000

What is a double block and bleed valve?

A double block and bleed valve are like having three valves in one.

API 6D defines a double block and bleed valve as a “single valve with two seating surfaces that, in the closed position, provides a seal against pressure from both ends of the valve with a means of venting/bleeding the cavity between the seating surfaces.”

There are a couple of different styles of double block and bleed valves. One style has two independently seating valves inside, with a bleed or drains valve. This configuration is referred to as double isolation and bleed (DIB). The DIB valve can isolate either side of the valve (bi-directionally) to vent or bleed the cavity and isolate piping.

This trunnion mounted ball valve from Val-Matic provides a double block and bleed in a single valve. This style can isolate piping on both sides of the valve (uni-directionally) to vent/bleed the valve cavity between the seats.

Using a single double block and bleed valve system versus 3 separate valves saves installation time, weight on the piping system, and space. It also cuts down the number of leak paths to the atmosphere, reducing the risk of hazards when transferring liquids dangerous to humans or the environment.

What are the applications of double block and bleed valves?

These types of valves are of high importance in gas and oil factories. But, according to valve manufacturers, this particular type of valve is also used for various other purposes. In situations where the piping which is fitted requires isolation and maintenance, the best choice is a double block and bleed valve.

Prevent product contamination
Remove equipment from service for cleaning or repair
Meter calibration
Liquid service near waterways or municipalities
Transmission and storage
Chemical injection and sampling
Isolate instrumentation such as pressure indicators and lever gauges
Primary process steam

How do these double block and bleed valves work?

These types of valves are designed in such a way that one can control the flowing of a liquid in the manifold as desired. The purpose of this double block is that it offers perfect sealing on both sides of the surface to ensure that there is no chance of leakage and that both sides of the surface can endure equal pressure.

Double Positive Isolation

Many people take the term “Double Block & Bleed” (DBB) to mean the same thing as “Double Positive Isolation” (DPI). While this may seem like a small matter, in reality, it means that some users may think they’ve achieved positive isolation when they haven’t. The key to understanding the difference between Double Block & Bleed (DBB) and Double Positive Isolation (DPI) can be found in API 6D. API 6D wasn’t always as clear as it could have been in spelling out the difference between DBB and DPI, but the addition in 2008 of several notes has clarified it.

API 6D defines a Double Block and Bleed Valve (DBB) as a “single valve with two seating surfaces that, in the closed position, provides a seal against pressure from both ends of the valve with a means of venting/bleeding the cavity between the seating surfaces.” The 2008 note points out that this valve does not provide positive double isolation when only one side is under pressure.

API 6D defines a Double Isolation and Bleed Valve (DIB) as a “single valve with two seating surfaces, each of which, in the closed position, provides a seal against pressure from a single source, with a means of venting/bleeding the cavity between the seating surfaces.” The 2008 note adds that this feature can be provided in one direction or in both directions.

The important distinction between the DBB and DIB is, that on a DBB if there is somebody working downstream on the line and the first seal leaks the second seal will not seal in that same direction.

Benefits of using double block and bleed valves

There are times when a machine has two separate liquids which if come in contact with each other can be very risky and cause great damage. Thus, in such a situation, double block and bleed valves are the best as they can properly control both liquids from leaking and mixing with each other. This is why; they are commonly used while handling toxic waste and dangerous chemicals as well.

If you are searching for an alternative with which you can ensure proper and safe venting of liquids from the machine which can pose a great environmental threat, then this type of valve is just best for that purpose.

Wanting to lessen your operation and production costs? If yes, then double block and bleed valves are the solutions for you because the multivalve system installed in the valves ensures better proficiency.

If you are planning to invest in valves then we highly recommend you invest in the double block and bleed valves as they are the best option. However, it is always better and safe to purchase the same from professionals who specialize in manufacturing the same.

How to choose a Double Block and Bleed Valve

Before choosing the type of valve that you require, it is recommended to consider the application, media, pressure, temperature, toxicity, and environment in which it will operate.

As DBB valves are often used in highly critical processes, it is important to test them so that you know they satisfy the requirements.

As an example, ZECO Valve has datasheets for all their DBB valves which detail valve type, rating/pressure, size, connection type, material, and options. To define a part number, all that is required is to use a chart to find the alphanumeric codes that will define the base unit and options. The below chart is a representation of their Flange DBB: