The Y-filter is a small equipment that removes a small amount of solid particles in the liquid, which can protect the normal operation of the equipment. When the fluid enters the filter cartridge with a certain filter screen, its impurities are blocked, and the clean filtrate is discharged from the filter. Discharge, when cleaning is needed, just take out the detachable filter cartridge and reinstall it after treatment.
Therefore, it is extremely convenient to use and maintain. Its installation method is as follows:
- 1. The Y-filter can be installed horizontally or vertically, and the water flow direction of the system should be the same as the arrow on the valve body during installation.
- 2. In order to facilitate maintenance, the Y-filter should be installed and used together with the stop valve. The stop valve should be installed on the upstream and downstream of the Y-filter. Once the Y-filter needs maintenance, the upstream and downstream stop valves can be closed. Cut off the connection between the Y-filter and the system;
- 3. When there is liquid flowing through the Y-filter, the liquid resistance is much larger than normal use, and the filter screen needs to be cleaned in time;
- 4. In order not to delay the normal use of the system when repairing the Y-filter, it is best to install a bypass pipeline while installing the Y-type filter, and close the stop valve on the bypass pipe at ordinary times. Open the stop valve on the bypass pipe when the filter is repaired;
- 5. When installing the Y-type filter, pay attention to reserve a certain amount of maintenance space for normal daily maintenance.
English 
German 
Spanish 
French 
Russian 
Portuguese 
Turkish