The Gas Valve combination provides reliable main line gas control for a wide range of applications, including boilers, furnaces, ovens and all types of industrial and commercial burners. The AH Actuators feature a fast opening time of 7–12 seconds (14–24 seconds also available), and provide a fast spring return shutoff time of one second.
HOV1 Safety Shutoff Valves, Normally Closed
The HOV1 is an underreported, globe-type, oil valve with a single, quick opening, stem-guided seat. This two-way, normally closed, bronze safety shutoff valve features a spring-loaded stem which, upon power interruption, drives the Teflon seat firmly closed within one second. The HOV1 is available with or without a valve seal overtravel interlock (FM Proof of closure).
HOV13 Safety Shutoff Valve, Quick opening, 3-way hydro motor
The HOV13 is an underreported, poppet-type, bronze-bodied safety shutoff valve, electrohydraulically operated to provide reliable on-off control of liquids or gases. The spring-loaded, stem-guided Teflon seat opens within seven seconds of power application and firmly closes within one second of power interruption.
K10 Solenoid Valves, Lever-actuated, Two-Way
The K10 normally-open or normally closed solenoid valves are suited for use with a wide range of media: (1) gasoline and light or heavy fuel oils in commercial and industrial combustion applications, and (2) air, water, steam, and other liquid media. The valve is most commonly used to control oil burner, boiler, and furnace safety systems, either manual or automatic.
S311 Fuel Oil Shutoff Valves, Dual-inlet
The S311 series two-way, normally closed, direct-acting solenoid valves control fuel oil to domestic high-pressure atomizing oil burners using No.2, No.4, and other comparable fuel oils. The S311 is available with a dual inlet valve body.
SV401 Series Oil Shutoff Valves, two-way normally closed
The SV401 is a compact, 2-way normally closed pilot piston-operated solenoid valve and is designed to control fuel oil to domestic and commercial atomizing oil burners. They are easy to install even in the tightest places.
Cameron T31 Ball Valve Manual
One of the most trusted valves in the petroleum industry, the CAMERON T31 Fully Welded Body Ball Valve combines the strength of forged components with a lightweight and compact spherical design. CAMERON T31 Fully Welded Body Ball Valves satisfy ASME 150 through 2500 (PN 20 through PN 420) and API 2000 through 10000 standards. Made of forged steel to assure uniform fine grain structure and toughness, they may be specified in sizes from 2″ to 56″ (DN 50 to DN 1400).
Features of Cameron T31 Ball Valve Manual
- Replace Stem Seal
- In the unlikely event of a stem seal needing replacement, it can be accomplished safely with the valve in service. With the body cavity vented, all line pressure to the stem area also is vented. Please contact your sales representative to obtain maintenance procedures.
- Safeguard Downstream Work
- With the valve closed and the vent fitting open, the possibility of the line media reaching a work area is reduced.
- Fire-Tested for Safety
- CAMERON fully welded ball valves can be supplied to API 6FA, API 607 and ISO 10497 standards. If industry standards change or customer requirements vary from the above, please contact your sales representative.
Related Tags :
Ten articles before and after
ITT General Controls Shutoff Gas Valves – Zeco Valve
ITT General Controls Special Purpose Valves – Zeco Valve
A facelift for ITT.nl – Zeco Valve
McDonnell & Miller Series 750 and 751P/752P Low Water Cut-Offs – Zeco Valve
Boilers en Boiler Controls – Zeco Valve
McDonnell & Miller Series 42S Low Water Cut-Off/Pump Controllers – Zeco Valve
Hydramotor Gas Valves AH4 / V710 – Zeco Valve
CAMERON T31 Fully Welded Ball Valve – Zeco Valve
English 
German 
Spanish 
French 
Russian 
Portuguese 
Turkish