trunnion mounted ball valves manufacturer – ZECO Valve

All You Need to Know About Trunnion Ball Valve

Jerry — Sun, 19 Jun 2022 14:26:24 +0000

What is a Tunnion Ball Valve?

The trunnion ball valve is an essential device for regulating the flow of fluids- steam, gas, or oil in pipeline. It is quarter-turn designs with a ball capable of rotating 90 degrees on its axis to either block or allow the flow of fluid. These valves have a spherical disk design at the center, which rotates to regulate the start-stop flow cycle. The disk often called the ball comes designed with a small protruding shaft at the top and bottom which are mechanically supported. In this case, flow is controlled by the position of a hole in the center of the ball. For their versatility, Trunnion mounted ball valves are useful in industries where such shut-off operation is required.

The Trunnion ball valves have adequate backing for the ball. The support is in shape similar to a shaft, and it’s called a trunnion. The Trunnion soaks up any additional pressure coming from the flow, thereby lowering the pressure on the valve seat and the ball. Trunnion mounted ball valves find their use in large-scale implementations that require low operating torque.

Construction of Trunnion Ball Valve

Trunnion mounted ball valves have a similar structure as traditional ball valves. The only difference is that trunnion ball valves have additional mechanical anchoring that supports the ball or disk. In this design, the ball is supported from both ends on the x-axis, so that it stays in place and is easy to control. Here is a look at the different parts of a trunnion-mounted ball valve.

Body
- The body of the valve is the casing that holds and protects the internal parts of a trunnion mounted ball valve. It can be made of carbon steel, stainless steel, low-temperature carbon steel, duplex, super duplex, Inconel, and more depending on the application. While metal seat ball valve and carbon steel ball valve are very suitable for high-temp applications.
Stem
- The stem of a trunnion mounted ball valve connects the ball to the actuator. It is connected to the ball through welded joints and it controls the movement of the ball. Trunnion ball valves have reinforced anti-blowout stems, that’s why they can handle cryogenic and high-temperatures without sustaining any damage.
Seats
- The seats of a trunnion-mounted ball valve surround the ball. When the actuator is turned, the seats hold the ball snugly in place, sealing off any access. Trunnion ball valves have spring-loaded seats that move towards the ball as it is held firmly in place.
Trunnion
- In a trunnion mounted ball valve, there is an additional shaft that holds the ball in place from below. This small shaft is known as a trunnion and it keeps the ball firmly in place. In some ball valves, the trunnion is an extension of the ball while in others it is connected to the ball through welded joints.
Disk
- The disk in a trunnion mounted ball valve is in the shape of a perforated, solid ball. The ball is connected to the stem on one end and the trunnion on the other. In a trunnion ball valve, the ball or disk is held in place while it rotates. The seats are always in contact with the ball, hence reducing torque.
Actuator
- The actuator in a trunnion ball valve is used to open or close the valve. There are different kinds of actuators used in ball valves depending upon the application and medium such as air operated ball valves. Bare stem, gear, hand lever, pneumatic actuator, and hydraulic actuator are some common actuators found on the valve. You can also use a gas actuator, gas-over-oil actuator, motor-operated actuator, hydraulic/electric actuator, hydraulic-operated actuator, and more.

How does a Trunnion Ball Valve work?

The trunnion forms the base onto which the ball is mounted. At the top end, the ball is linked to the stem and the stem is connected to an exterior actuator lever. In a flanged trunnion ball valve, there are spring-loaded seats and a polymer ring insert between the trunnion and the ball. The springs put pressure on the ball to keep it in place. Together with the polymer ring, they also reduce friction when the ball is rotating.

To facilitate the flow of media, the ball is made hollow in the middle. It can either be a full bore or a partial bore. A full bore is a ball whose hollow part is the same size as the pipeline it is installed in. Whereas in a partial bore, the diameter of the ball’s hollow part is smaller than the diameter of the pipeline.

When the actuator is turned, the stem connected to it also turns. These actions cause the ball to rotate on the trunnion to an open or closed position. During and after fluid flow, seals in the seats and stem prevent the fluid from leaking out of the pipeline. An adjustable gland packing box also helps the valve take on different capacities of pressure. A typical trunnion ball valve would also have 2 bleeders for purposes of depressurization.

The structure of a trunnion ball valve makes it ideal for application in high pressure and high-temperature fluid management applications.

Types of Trunnion Ball Valves

Based on Body Configuration

Side Entry Trunnion Ball Valve
- This type of design is also referred to as the split body trunnion mounted ball valve. It assembles its ball from the side.
Top Entry Trunnion Ball Valve
- This trunnion ball valve is a unique design that assembles the ball from the top.
Welded body trunnion ball valve
- This design is mainly an application for the transmission of gas in buried pipelines.

Based on Bore

Full Bore Trunnion Ball Valve
- In the case of full bore trunnion ball valves design, the diameter of the bore aligns with the connected pipeline.
Reduced Bore Trunnion Ball Valve
- A reduced bore valve is a design that has a bore size lesser than the connected pipeline’s diameter.

Based on Sealing Material

Soft Seat Trunnion Ball Valve
- Soft seats are typically constructed of thermoplastic substances such as PTFE, DEVLON, PEEK.
Metal Seat Trunnion Ball Valve
- The main difference between metal seated valves as against the soft seated trunnion ball valves is its ability to survive high temperatures and harsh service conditions.

Applications of Trunnion Ball Valves

Trunnion mounted ball valves are extremely versatile. They are used in many different kinds of industries because of their customizable features. For example, Trunnion Mounted Ball Valve features O-rings and fire-safe stem packaging that prevent leakages. It also comes with stainless steel sealant injection fittings for emergency stem or seat sealing. Trunnion mounted ball valves are used widely in chemical, petrochemical, oil and gas, LNG, hydrocarbon industries.

They are also used for many different kinds of applications including skids like turbine, compressor, generator, and separator, field gas, polymer, LNG, crude oil, and industrial gas processing plants, tank farms, automated process applications, hydrocarbon processing, and oil refinery feedstock lines. Trunnion mounted ball valves are suitable for both large scale high-pressure applications and compact, low-temperature situations.

Characterlistics of Trunnion Mounted Ball Valve

Although there are many types of trunnion mounted ball valves produced by trunnion ball valve manufacturers, they all have the following characteristics:

Its operation is labor-saving: the ball is supported by upper and lower bearings, which reduces friction. It eliminates the excessive torque caused by the enormous sealing load formed by the sphere and seal seat driven by the inlet pressure.
Reliable sealing performance: PTFE unisexual material seals are embedded in stainless steel seats with springs at the end of the metal seats to ensure sufficient preload of the seals. When the sealing surface of trunnion type ball valve is worn out during use, the valve will continue to ensure good sealing performance under the action of spring.
Fire-proof structure: In order to prevent the PTFE sealing ring from burning down due to sudden heat or fire, and to increase the fire potential, a fire-proof sealing ring is set between the sphere and the valve seat. When the sealing ring is burned down, under the action of spring force, the seat sealing ring is quickly pushed onto the sphere to form a metal and metal seal. It has a certain degree of sealing effect. The refractory test meets the requirements of APl6FA and APl607 standards.
Automatic pressure relief function: When the medium pressure in the stagnant chamber of the trunnion mounted ball valve increases abnormally beyond the pre-force of the spring, the seat retreats away from the ball to achieve the effect of automatic pressure relief, and the seat is automatically restored after pressure relief.
Drainage pipeline: Both upper and lower parts of the valve body are equipped with discharge L, which can check whether the valve seat leaks or not. In work, when the valve is fully open or closed, the pressure in the middle chamber can be discharged and the filler can be replaced directly. The residue in the middle chamber can be discharged to reduce the medium pollution to the trunnion mounted ball valves.

ZECO Valve is one of the most professional trunnion mounted ball valve suppliers. For more information of product features, please visit our website at http://www.zecovalve.com/.

ZECO Valve

Gate Valve vs Ball Valve

NBR Butterfly Valve

What is an Axial Check Valve

Gate Valve Repair

What is a Globe Valve?

Manual Operate Gate Valve Manufacturer

Difference Between Gate Valve And Butterfly Valve

What are Globe Valves?

The post All You Need to Know About Trunnion Ball Valve appeared first on ZECO Valve.

Valve Manufacturer Saudi Arabia

Jerry — Tue, 18 Jan 2022 08:22:17 +0000

Saudi Arabia is known for its Petroleum and Oil & Gas Industry and an increase in the demand for butterfly valves in those industries have increased the number of butterfly valves suppliers. It is difficult to choose from so many options for butterfly valve supplies in Saudi Arabia, but do not worry!

After thorough research, we have made a list of some of the top valve manufacturer Saudi Arabia that will provide high-quality valves to you.

AVK Valve

Founded: 1985

Jeddah, Kingdom of Saudi Arabia. It is a part of The AVK Group, a privately owned industrial group that currently comprises more than 100 companies.

AVK’s core business is the production of valves, hydrants, and accessories for water, gas, sewage treatment, and fire protection. Furthermore, AVK has built up strong brands supplying valves and controls for water treatment, dams, reservoirs, HVAC, chemical processing, marine, and other industrial sectors. AVK SVMC has its production facility and sales office in Jeddah, KSA as well as express service centers in Riyadh, Dammam, and Buraidah.

AVK SVMC is producing a wide range of valves, fittings, and fire hydrants according to BS, AWWA, and DIN and meeting other international standards and customer specifications. AVK Product range is approved by all major clients in the Kingdom of Saudi Arabia such as Saudi Aramco, Water authorities, Royal Commission, Marafiq, SWCC, SABIC, Civil Defense, Ma’aden, National Water Company, etc. Products produced at AVK SVMC are also exported to all GCC countries, Middle East, Europe, Asia, and African countries too

ZECO Valve

Founded: 1991

Certification: ISO, API 6D, API 600

ZECO Valves is one of the leading Valves Supplier, Manufacturers & Stockists in Saudi Arabia. ZECO Valves supplier and exports to most countries such as Dubai, Saudi Arabia, Kuwait, India, etc. ZECO Valves manufactures high-quality valves of all types. ZECO Valves offers a wide range of Valves. These Valves come in various sizes, shapes, and dimensions and can be modified to match our customers’ specific requirements. ZECO Valves sells and distributes valves that have been thoroughly tested. Valves at ZECO Valves are subjected to many toughness and hardness tests before being distributed to our customers. Our Valves and various variants are manufactured in Saudi Arabia under international standards.

Our high-quality Valves are specifically intended for the chemical industries, fire prevention systems, and shipping industries, among other applications, including controlling water for irrigation, industrial uses for handling processes, and residential uses. Valves, and their various varieties, are created and developed to meet international quality standards. Valves are made from the highest quality raw materials. We can also customize Valves and other types to meet the needs of our customers In Saudi Arabia. ZECO Valves offers a wide range of Valves. Such as Ball Valves, Butterfly Valves, Gate Valves, Strainer Valves, Check Valves, Globe Valves & more.

SPSV

SPSV, headquartered in a second industrial city, Dammam, Kingdom of Saudi Arabia, is a diversified manufacturer of valves for the energy industries. born in 2012 – thanks to the joint venture of OMB Valves (Italy), IVM (Saudi Arabia), and Orion Valves (Italy) – with the purpose to meet the surging demand of the Saudi and gulf oil & gas industry, nowadays SPSV is a globally well recognized manufacturer of forged and cast steel valves with manufacturing operations in the heart of middle east. the company sells its products both to engineering companies and to end users, manufacturing a complete line of steel ball, gate, globe, and check valves. SPSV operates a state-of-the-art plant with the latest technology in terms of manufacturing, testing, and painting to offer high integrity products qualified for the most severe services.

SPSV operates a state of the art plant with the latest manufacturing, testing, and painting technology to offer high integrity products qualified for the most severe services.

In 2012, IVM, OMG, and ORION joined forces to establish SPSV to meet the surging demand of the Saudi and Gulf oil & gas industry.

On off valve manufacturers

An ON/OFF Valve is the fluid counterpart of an electrical switch, a device that enables unrestricted flow or prevents it entirely. These valves are frequently used to move process fluid between locations, start and halt batch processes, and activate automated safety (shutdown) features.
Ball, gate, and globe valves are often used for on/off service. Large on/off valves are usually constructed in such a way that the full-open position gives a nearly unobstructed passage for fluid to flow through. This is exactly what ball, Globe, and gate valves do:

BALL VALVE
- A huge metal valve with a lever handle is known as a ball valve. The valve opens and closes entirely with a brief 1/4 turn of the lever handle, making it ideal for the quick turn-off. This is the sort of valve that is commonly found at the home’s main water shutoff. The body of the valve below the handle will normally have a thicker central piece where the ball inside fits, making it easy to spot. A hole runs through the middle of the internal ball. When the valve is opened, the hole aligns with the water pipe’s direction, allowing water to flow. The ball spins 90 degrees when the handle is closed, blocking the hole in the ball.
GATE VALVE
- The mechanism that opens and closes the valve is referred to as a gate valve. A circular handle is twisted to raise or lower a metal gate inside the valve body to turn a gate valve on or off. The gate prevents water from flowing while the valve is closed. The gate valve, like the ball valve, is an all-or-nothing valve that allows full flow or shuts it off totally. A gate valve, like a ball valve, is a huge metal valve. These are more widespread in industrial applications than they are in home plumbing. However, one may be found in charge of your main water line or another large water pipe. They’ve been seen to appear on the pipe leading to a hot water boiler.
GLOBE VALVE
- A globe valve looks like a ball valve from the exterior, with a slightly bulbous metal body. A globe valve, also known as a ball valve, is a type of valve that allows for variable water flow control. There is a baffle inside the valve with a water flow port running through it. The plunger is operated by the handle, which has a washer or seal on the bottom. The plunger pushes down against the water-flow port as the handle shuts the valve, partially closing it off. When you turn the handle, you can usually feel the plunger inside the valve tight en. This valve is utilized when the flow of water needs to be controlled in a variable manner.